▍Certification Overview
Standards and Certification Document
Test standard: GB31241-2014: Lithium ion cells and batteries used in portable electronic equipment―Safety requirements
Certification document: CQC11-464112-2015: Secondary Battery and Battery Pack Safety Certification Rules for Portable Electronic Devices
Background and Date of implementation
1. GB31241-2014 was published on December 5th, 2014;
2. GB31241-2014 was mandatorily implemented on August 1st, 2015. ;
3. On October 1...
▍BSMI Introduction Introduction of BSMI certification
BSMI is short for Bureau of Standards, Metrology and Inspection, established in 1930 and called National Metrology Bureau at that time. It is the supreme inspection organization in Republic of China in charge of the work on national standards, metrology and product inspection etc. The inspection standards of electrical appliances in Taiwan are enacted by BSMI. Products are authorized to use BSMI marking on the conditions that they ar...
▍BSMI Introduction Introduction of BSMI certification
BSMI is short for Bureau of Standards, Metrology and Inspection, established in 1930 and called National Metrology Bureau at that time. It is the supreme inspection organization in Republic of China in charge of the work on national standards, metrology and product inspection etc. The inspection standards of electrical appliances in Taiwan are enacted by BSMI. Products are authorized to use BSMI marking on the conditions that they ar...
▍What is GOST-R Declaration?
GOST-R Declaration of Conformity is a declaration document to prove goods are complied with Russian safety regulations. When the Law of Product and Certification Service was issued by Russian Federation in 1995, compulsory product certification system came into force in Russia. It requires all products sold in Russian market to be printed with GOST mandatory certification mark.
As one of methods of mandatory conformity certification, Gost-R Declaration of Con...
▍What is CE Certification?
The CE mark is a “passport” for products to enter the EU market and the EU Free Trade Association countries market. Any stipulated products (involved in the new method directive), whether manufactured outside the EU or in EU member states, in order to circulate freely in the EU market, they must be in compliance with the requirements of the directive and relevant harmonized standards before being placed on the EU market , and affix the CE mark. This...
▍SIRIM Certification
For the security of person and property, Malaysia government establishes product certification scheme and puts surveillance on electronic appliances, information & multimedia and construction materials. Controlled products can be exported to Malaysia only after obtaining product certification certificate and labeling.
▍SIRIM QAS
SIRIM QAS, a wholly-owned subsidiary of the Malaysian Institute of Industry Standards, is the only designated certification unit o...
▍Vietnam MIC Certification
Circular 42/2016/TT-BTTTT stipulated that batteries installed in mobile phones, tablets and notebooks are not allowed to be exported to Vietnam unless they are subjected to DoC certifctaion since Oct.1,2016. DoC will also be required to provide when applying Type Approval for end products (mobile phones, tablets and notebooks).
MIC released new Circular 04/2018/TT-BTTTT in May,2018 which stipulates that no more IEC 62133:2012 report issued by overseas accredit...
▍Compulsory Registration Scheme (CRS)
Ministry of Electronics & Information Technology released Electronics & Information Technology Goods-Requirement for Compulsory Registration Order I-Notified on 7th September, 2012, and it came into effect on 3rd October, 2013. Electronics &Information Technology Goods Requirement for Compulsory Registration, what is usually called BIS certification, is actually called CRS registration/certification. All electronic products in the compuls...
▍What is cTUVus & ETL CERTIFICATION?
OSHA (Occupational Safety and Health Administration), affiliated to US DOL (Department of Labor), demands that all products to be used in workplace must be tested and certificated by NRTL before being sold in market. Applicable testing standards include American National Standards Institute (ANSI) standards; American Society for Testing Material (ASTM) standards, Underwriter Laboratory (UL) standards, and factory mutual-recognition organization st...
▍What is CE Certification?
The CE mark is a “passport” for products to enter the EU market and the EU Free Trade Association countries market. Any stipulated products (involved in the new method directive), whether manufactured outside the EU or in EU member states, in order to circulate freely in the EU market, they must be in compliance with the requirements of the directive and relevant harmonized standards before being placed on the EU market , and affix the CE mark. This...
▍Compulsory Registration Scheme (CRS)
Ministry of Electronics & Information Technology released Electronics & Information Technology Goods-Requirement for Compulsory Registration Order I-Notified on 7th September, 2012, and it came into effect on 3rd October, 2013. Electronics &Information Technology Goods Requirement for Compulsory Registration, what is usually called BIS certification, is actually called CRS registration/certification. All electronic products in the compuls...