The latest management requirements for CCC marks,
CCC,

▍BSMI Introduction Introduction of BSMI certification

BSMI is short for Bureau of Standards, Metrology and Inspection, established in 1930 and called National Metrology Bureau at that time. It is the supreme inspection organization in Republic of China in charge of the work on national standards, metrology and product inspection etc. The inspection standards of electrical appliances in Taiwan are enacted by BSMI. Products are authorized to use BSMI marking on the conditions that they are in compliance with safety requirements, EMC testing and other related tests.

Electrical appliances and electronic products are tested according to the following three schemes: type-approved (T), registration of product certification(R) and declaration of conformity (D).

▍What is the standard of BSMI?

On 20 November 2013, it is announced by BSMI that from 1^st, May 2014, 3C secondary lithium cell/battery, secondary lithium power bank and 3C battery charger are not permitted to access to Taiwan market until they are inspected and qualified according to the relevant standards (as shown in table below).

▍Why MCM?

● In 2014, rechargeable lithium battery became mandatory in Taiwan, and MCM began to provide the latest information about BSMI certification and the testing service for global clients, especially those from mainland China.

● High Rate of Pass: MCM has already help clients to obtained more than 1,000 BSMI certificates till now in one go.

● Bundled services: MCM helps clients successfully enter multiple markets in worldwide through one-stop bundled service of simple procedure.

China regulates the use of a unified mark for compulsory product certification, namely “CCC“, that is, “China Compulsory Certification”. Any product included in the catalog of compulsory certification that has not obtained a certificate issued by a designated certification body and has not affixed a certification mark in accordance with regulations may not be manufactured, sold, imported, or used in other business activities. In March 2018, in order to facilitate the application of certification marks by enterprises, the National Certification and Accreditation Administration reformed the management of the issuance of CCC marks and issued the “Management Requirements for the Application of Compulsory Product Certification Marks”, which regulates the use of CCC marks. Specific provisions are made on the prerequisites, the specification and color of the sign, the location of application, and the timing of application.
On August 10 this year, the National Certification and Accreditation Administration issued the “Announcement on Improving Compulsory Product Certificates and Mark Management” again, which put forward new requirements for the use of the CCC mark. There are mainly the following changes:
The dimension specifications of the standard CCC mark have been added, and there are now 5 types.
Cancel the use of non-standard specifications CCC mark (deformation mark).
Added electronically marked CCC mark: the CCC mark is electronically displayed on the integrated screen of the product (the product cannot be used normally after the screen is disassembled).
The methods of using the CCC mark are clarified.
Below is a summary of the new version document.
The CCC logo pattern is oval. The logo vector image can be downloaded from the compulsory product certification column on the website of the National Certification and Accreditation Administration.