China Taiwan Bsmi Report – Taiwan- BSMI – MCM Service and Testing

Taiwan Bsmi Report – Taiwan- BSMI – MCM

Short Description:

Project Instruction

Products tags

Feedback (2)

MCM has hired a former senior BIS official in India as a certification consultant, removing the risk of cancellation of registration number, to help to secure the projects. Brazil Anatel Certification Price , Indian Crs Report , Ctuvus Requirement , MCM serves as a witness laboratory for TUV RH and ITS on the North American certification program. All tests can be conducted in the MCM laboratory, providing customers with better face-to-face technical communication services.

Taiwan Bsmi Report – Taiwan- BSMI – MCM Detail:

▍BSMI Introduction Introduction of BSMI certification

BSMI is short for Bureau of Standards, Metrology and Inspection, established in 1930 and called National Metrology Bureau at that time. It is the supreme inspection organization in Republic of China in charge of the work on national standards, metrology and product inspection etc. The inspection standards of electrical appliances in Taiwan are enacted by BSMI. Products are authorized to use BSMI marking on the conditions that they are in compliance with safety requirements, EMC testing and other related tests.

Electrical appliances and electronic products are tested according to the following three schemes: type-approved (T), registration of product certification(R) and declaration of conformity (D).

▍What is the standard of BSMI?

On 20 November 2013, it is announced by BSMI that from 1^st, May 2014, 3C secondary lithium cell/battery, secondary lithium power bank and 3C battery charger are not permitted to access to Taiwan market until they are inspected and qualified according to the relevant standards (as shown in table below).

Product Category for Test

3C Secondary Lithium Battery with single cell or pack ( button shape excluded)

3C Secondary Lithium Power Bank

3C Battery Charger

Remarks: CNS 15364 1999 version is valid to 30 April 2014. Cell, battery and

Mobile only conduct capacity test by CNS14857-2 (2002 version).

Test Standard

CNS 15364 (1999 version)

CNS 15364 (2002 version )

CNS 14587-2 (2002 version)

CNS 15364 (1999 version)

CNS 15364 (2002 version )

CNS 14336-1 (1999 version）

CNS 13438 (1995 version)

CNS 14857-2 (2002 version)

CNS 14336-1 (1999 version)

CNS 134408 (1993 version)

CNS 13438 (1995 version)

Inspection Model

RPC Model II and Model III

▍Why MCM?

● In 2014, rechargeable lithium battery became mandatory in Taiwan, and MCM began to provide the latest information about BSMI certification and the testing service for global clients, especially those from mainland China.

● High Rate of Pass: MCM has already help clients to obtained more than 1,000 BSMI certificates till now in one go.

● Bundled services: MCM helps clients successfully enter multiple markets in worldwide through one-stop bundled service of simple procedure.

Product detail pictures:

Related Product Guide:

Rich Experience: MCM has helped clients in worldwide by completing more than 50,000 UN38.3 test reports and certificates. Taiwan Bsmi Report – Taiwan- BSMI – MCM , The product will supply to all over the world, such as: USA, Cape Town, Italy, As the world's leading third party organization deeply and vertically concentrated on battery certification and testing, MCM provides customized solutions for customers based on their conditions. This is also the results of MCM's more than ten years of deep cultivation in the battery certification and testing industry.

Battery Bsmi Technical Requirement