Taiwan BSMI certification projects
Taiwan BSMI certification projects,
BSMI,
▍BSMI Introduction Introduction of BSMI certification
BSMI is short for Bureau of Standards, Metrology and Inspection, established in 1930 and called National Metrology Bureau at that time. It is the supreme inspection organization in Republic of China in charge of the work on national standards, metrology and product inspection etc. The inspection standards of electrical appliances in Taiwan are enacted by BSMI. Products are authorized to use BSMI marking on the conditions that they are in compliance with safety requirements, EMC testing and other related tests.
Electrical appliances and electronic products are tested according to the following three schemes: type-approved (T), registration of product certification(R) and declaration of conformity (D).
▍What is the standard of BSMI?
On 20 November 2013, it is announced by BSMI that from 1st, May 2014, 3C secondary lithium cell/battery, secondary lithium power bank and 3C battery charger are not permitted to access to Taiwan market until they are inspected and qualified according to the relevant standards (as shown in table below).
|
Product Category for Test |
3C Secondary Lithium Battery with single cell or pack ( button shape excluded) |
3C Secondary Lithium Power Bank |
3C Battery Charger |
Remarks: CNS 15364 1999 version is valid to 30 April 2014. Cell, battery and Mobile only conduct capacity test by CNS14857-2 (2002 version).
|
|
Test Standard |
CNS 15364 (1999 version) CNS 15364 (2002 version ) CNS 14587-2 (2002 version)
|
CNS 15364 (1999 version) CNS 15364 (2002 version ) CNS 14336-1 (1999 version） CNS 13438 (1995 version) CNS 14857-2 (2002 version)
|
CNS 14336-1 (1999 version) CNS 134408 (1993 version) CNS 13438 (1995 version)
|
|
|
Inspection Model |
RPC Model II and Model III |
RPC Model II and Model III |
RPC Model II and Model III |
▍Why MCM?
● In 2014, rechargeable lithium battery became mandatory in Taiwan, and MCM began to provide the latest information about BSMI certification and the testing service for global clients, especially those from mainland China.
● High Rate of Pass: MCM has already help clients to obtained more than 1,000 BSMI certificates till now in one go.
● Bundled services: MCM helps clients successfully enter multiple markets in worldwide through one-stop bundled service of simple procedure.
BSMI (Bureau of Standards, Metrology and Inspection. M.O.E.A.), formerly known as the National Bureau of Weights and Measures established in 1930, is the highest inspection authority in the Republic of China, and responsible for national standards, weights and measures and commodity inspection. The product inspection code for electronic and electrical products in Taiwan is formulated by BSMI. Products must meet safety and EMC tests and related tests before they can be authorized to use the BSMI mark.
According to the BSMI notice on November 20, 2013, 3C secondary lithium cells/batteries need to be inspected according to the corresponding standards before entering the Taiwan market from May 1, 2014.
Standard: CNS 15364 (102) with reference to IEC 62133: 2012
Providing customers with the latest BSMI information and local testing services, as MCM is the first institution cooperated with Taiwan BSMI accredited laboratory.
Helping customers pass more than 1,000 BSMI projects at one time.
Provide the solution ‘ get multiple certificates via one test’ to benifit the clients whose target is the global market
