Featured
service
-
Lithium Battery Tisi Technical Requirement Thailand- TISI – MCM
▍What is TISI Certification? TISI is short for Thai Industrial Standards Institute, affiliating to Thailand Industry Department. TISI is responsible for formulating the domestic standards as well as participating in international standards formulation and supervising the products and qualified assessment procedure to ensure the standard compliance and recognition. TISI is a governmental authorized regulatory organization for compulsory certification in Thailand. It is also responsible fo... -
Lithium Battery 2011/65/Eu – EU- CE – MCM
▍What is CE Certification? The CE mark is a “passport” for products to enter the EU market and the EU Free Trade Association countries market. Any stipulated products (involved in the new method directive), whether manufactured outside the EU or in EU member states, in order to circulate freely in the EU market, they must be in compliance with the requirements of the directive and relevant harmonized standards before being placed on the EU market , and affix the CE mark. This... -
Lithium Battery Ctuvus Testing Laboratory Service – America, Canada- cTUVus&ETL – MCM
▍What is cTUVus & ETL CERTIFICATION? OSHA (Occupational Safety and Health Administration), affiliated to US DOL (Department of Labor), demands that all products to be used in workplace must be tested and certificated by NRTL before being sold in market. Applicable testing standards include American National Standards Institute (ANSI) standards; American Society for Testing Material (ASTM) standards, Underwriter Laboratory (UL) standards, and factory mutual-recognition organization st... -
Battery Sirim Requirement Service – Malaysia- SIRIM – MCM
▍SIRIM Certification For the security of person and property, Malaysia government establishes product certification scheme and puts surveillance on electronic appliances, information & multimedia and construction materials. Controlled products can be exported to Malaysia only after obtaining product certification certificate and labeling. ▍SIRIM QAS SIRIM QAS, a wholly-owned subsidiary of the Malaysian Institute of Industry Standards, is the only designated certification unit o... -
Battery Tisi Certificate Lead Time Thailand- TISI – MCM
▍What is TISI Certification? TISI is short for Thai Industrial Standards Institute, affiliating to Thailand Industry Department. TISI is responsible for formulating the domestic standards as well as participating in international standards formulation and supervising the products and qualified assessment procedure to ensure the standard compliance and recognition. TISI is a governmental authorized regulatory organization for compulsory certification in Thailand. It is also responsible fo... -
Lithium Battery Anatel Act.3484 Testing Time Lead Time – Brazil- ANATEL – MCM
▍What is ANATEL Homologation? ANATEL is a short for Agencia Nacional de Telecomunicacoes which is Brazil governmental authority to certified communication products for both compulsory and voluntary certification. Its approval and compliance procedures are the same both for Brazil domestic and abroad products. If products are applicable to compulsory certification, the testing result and report must be in line with the specified rules and regulations as requested by ANATEL. Product certif... -
Lithium Battery Ctia Testing Lab – North America- CTIA – MCM
▍What is CTIA CERTIFICATION? CTIA, the abbreviation of Cellular Telecommunications and Internet Association, is a non-profit civic organization established in 1984 for the purpose of guaranteeing benefit of operators, manufacturers and users. CTIA consists of all U.S. operators and manufacturers from mobile radio services, as well as from wireless data services and products. Supported by FCC (Federal Communications Commission) and Congress, CTIA performs a large part of duties and functi... -
Ce Test Method Lead Time – EU- CE – MCM
▍What is CE Certification? The CE mark is a “passport” for products to enter the EU market and the EU Free Trade Association countries market. Any stipulated products (involved in the new method directive), whether manufactured outside the EU or in EU member states, in order to circulate freely in the EU market, they must be in compliance with the requirements of the directive and relevant harmonized standards before being placed on the EU market , and affix the CE mark. This... -
Battery Eac Testing Report – Customs Union- EAC, GOST-R – MCM
▍What is GOST-R Declaration? GOST-R Declaration of Conformity is a declaration document to prove goods are complied with Russian safety regulations. When the Law of Product and Certification Service was issued by Russian Federation in 1995, compulsory product certification system came into force in Russia. It requires all products sold in Russian market to be printed with GOST mandatory certification mark. As one of methods of mandatory conformity certification, Gost-R Declaration of Con... -
Lithium Battery Korea Testing Service Lead Time – Korea- KC – MCM
▍What is KC? Since 25th Aug., 2008，Korea Ministry of Knowledge Economy (MKE) announced that the National Standard Committee will conduct a new national unified certification mark — named KC mark replacing Korean Certification during the time between Jul. 2009 and Dec. 2010. Electrical Appliances safety certification scheme (KC Certification) is a mandatory and self-regulatory safety confirmation scheme according to Electrical Appliances Safety Control Act, a scheme which certified... -
Battery Malaysia Sirim Testing Service – Malaysia- SIRIM – MCM
▍SIRIM Certification For the security of person and property, Malaysia government establishes product certification scheme and puts surveillance on electronic appliances, information & multimedia and construction materials. Controlled products can be exported to Malaysia only after obtaining product certification certificate and labeling. ▍SIRIM QAS SIRIM QAS, a wholly-owned subsidiary of the Malaysian Institute of Industry Standards, is the only designated certification unit o... -
Accumulator Un38.3 Certification – Transport- UN38.3 – MCM
▍Document requirement 1. UN38.3 test report 2. 1.2m drop test report (if applicable) 3. Accreditation report of transportation 4. MSDS(if applicable) ▍Testing Standard QCVN101：2016/BTTTT（refer to IEC 62133：2012) ▍Test item 1.Altitude simulation 2. Thermal test 3. Vibration 4. Shock 5. External short circuit 6. Impact/Crush 7. Overcharge 8. Forced discharge 9. 1.2mdrop test repo...