Featured
service
-
Battery Ce Testing Time Lead Time – EU- CE – MCM
▍What is CE Certification? The CE mark is a “passport” for products to enter the EU market and the EU Free Trade Association countries market. Any stipulated products (involved in the new method directive), whether manufactured outside the EU or in EU member states, in order to circulate freely in the EU market, they must be in compliance with the requirements of the directive and relevant harmonized standards before being placed on the EU market , and affix the CE mark. This... -
Nickel Cadmium Battery Un38.3 Report – Transport- UN38.3 – MCM
▍Document requirement 1. UN38.3 test report 2. 1.2m drop test report (if applicable) 3. Accreditation report of transportation 4. MSDS(if applicable) ▍Testing Standard QCVN101：2016/BTTTT（refer to IEC 62133：2012) ▍Test item 1.Altitude simulation 2. Thermal test 3. Vibration 4. Shock 5. External short circuit 6. Impact/Crush 7. Overcharge 8. Forced discharge 9. 1.2mdrop test repo... -
Lithium Battery Anatel Act.3484 Testing Time Lead Time – Brazil- ANATEL – MCM
▍What is ANATEL Homologation? ANATEL is a short for Agencia Nacional de Telecomunicacoes which is Brazil governmental authority to certified communication products for both compulsory and voluntary certification. Its approval and compliance procedures are the same both for Brazil domestic and abroad products. If products are applicable to compulsory certification, the testing result and report must be in line with the specified rules and regulations as requested by ANATEL. Product certif... -
Lithium Battery Sirim Test Service – Malaysia- SIRIM – MCM
▍SIRIM Certification For the security of person and property, Malaysia government establishes product certification scheme and puts surveillance on electronic appliances, information & multimedia and construction materials. Controlled products can be exported to Malaysia only after obtaining product certification certificate and labeling. ▍SIRIM QAS SIRIM QAS, a wholly-owned subsidiary of the Malaysian Institute of Industry Standards, is the only designated certification unit o... -
Lithium Battery Indian Crs Certification Lead Time – India – CRS – MCM
▍Compulsory Registration Scheme (CRS) Ministry of Electronics & Information Technology released Electronics & Information Technology Goods-Requirement for Compulsory Registration Order I-Notified on 7th September, 2012, and it came into effect on 3rd October, 2013. Electronics &Information Technology Goods Requirement for Compulsory Registration, what is usually called BIS certification, is actually called CRS registration/certification. All electronic products in the compuls... -
Ni-Cd Battery Un38.3 Testing – Transport- UN38.3 – MCM
▍Document requirement 1. UN38.3 test report 2. 1.2m drop test report (if applicable) 3. Accreditation report of transportation 4. MSDS(if applicable) ▍Testing Standard QCVN101：2016/BTTTT（refer to IEC 62133：2012) ▍Test item 1.Altitude simulation 2. Thermal test 3. Vibration 4. Shock 5. External short circuit 6. Impact/Crush 7. Overcharge 8. Forced discharge 9. 1.2mdrop test repo... -
Battery Eac Certification Service Report – Customs Union- EAC, GOST-R – MCM
▍What is GOST-R Declaration? GOST-R Declaration of Conformity is a declaration document to prove goods are complied with Russian safety regulations. When the Law of Product and Certification Service was issued by Russian Federation in 1995, compulsory product certification system came into force in Russia. It requires all products sold in Russian market to be printed with GOST mandatory certification mark. As one of methods of mandatory conformity certification, Gost-R Declaration of Con... -
Battery Cb Technical Documents Service – Vietnam- MIC – MCM
▍Vietnam MIC Certification Circular 42/2016/TT-BTTTT stipulated that batteries installed in mobile phones, tablets and notebooks are not allowed to be exported to Vietnam unless they are subjected to DoC certifctaion since Oct.1,2016. DoC will also be required to provide when applying Type Approval for end products (mobile phones, tablets and notebooks). MIC released new Circular 04/2018/TT-BTTTT in May,2018 which stipulates that no more IEC 62133:2012 report issued by overseas accredit... -
Japan Battery Pse Test Items Lead Time – Japan- PSE – MCM
▍What is PSE Certification? PSE (Product Safety of Electrical Appliance & Material) is a mandatory certification system in Japan. It is also called ‘Compliance Inspection’ which it is a mandatory market access system for electrical appliance. PSE certification is composed of two parts: EMC and product safety and it is also an important regulation of Japan safety law for electrical appliance. ▍Certification Standard for lithium batteries Interpretation for METI Ordinance for Tech... -
Japan Battery Pse Lead Time – Japan- PSE – MCM
▍What is PSE Certification? PSE (Product Safety of Electrical Appliance & Material) is a mandatory certification system in Japan. It is also called ‘Compliance Inspection’ which it is a mandatory market access system for electrical appliance. PSE certification is composed of two parts: EMC and product safety and it is also an important regulation of Japan safety law for electrical appliance. ▍Certification Standard for lithium batteries Interpretation for METI Ordinance for Tech... -
China Battery Cqc Technical Requirement Lead Time – China- CQC – MCM
▍Certification Overview Standards and Certification Document Test standard: GB31241-2014: Lithium ion cells and batteries used in portable electronic equipment―Safety requirements Certification document: CQC11-464112-2015: Secondary Battery and Battery Pack Safety Certification Rules for Portable Electronic Devices Background and Date of implementation 1. GB31241-2014 was published on December 5th, 2014; 2. GB31241-2014 was mandatorily implemented on August 1st, 2015. ; 3. On October 1... -
Battery Battery Cqc Technical Documents Service – Vietnam- MIC – MCM
▍Vietnam MIC Certification Circular 42/2016/TT-BTTTT stipulated that batteries installed in mobile phones, tablets and notebooks are not allowed to be exported to Vietnam unless they are subjected to DoC certifctaion since Oct.1,2016. DoC will also be required to provide when applying Type Approval for end products (mobile phones, tablets and notebooks). MIC released new Circular 04/2018/TT-BTTTT in May,2018 which stipulates that no more IEC 62133:2012 report issued by overseas accredit...