DUST-PROOF IP6X TEST
DUST-PROOF IP6X TEST,
Test Purpose,
▍What is cTUVus & ETL CERTIFICATION?
OSHA (Occupational Safety and Health Administration), affiliated to US DOL (Department of Labor), demands that all products to be used in workplace must be tested and certificated by NRTL before being sold in market. Applicable testing standards include American National Standards Institute (ANSI) standards; American Society for Testing Material (ASTM) standards, Underwriter Laboratory (UL) standards, and factory mutual-recognition organization standards.
▍OSHA, NRTL, cTUVus, ETL and UL terms definition and relationship
OSHA: Abbreviation of Occupational Safety and Health Administration. It is an affiliation of US DOL (Department of Labor).
NRTL： Abbreviation of Nationally Recognized Testing Laboratory. It is in charge of lab accreditation. Up to now, there are 18 third-party testing institutions approved by NRTL, including TUV, ITS, MET and so forth.
cTUVus： Certification mark of TUVRh in North America.
ETL： Abbreviation of American Electrical Testing Laboratory. It was established in 1896 by Albert Einstein, the American inventor.
UL： Abbreviation of Underwriter Laboratories Inc.
▍Difference between cTUVus, ETL & UL
| Item | UL | cTUVus | ETL |
| Applied standard |
Same |
||
| Institution qualified for certificate receipt |
NRTL (Nationally approved laboratory) |
||
| Applied market |
North America (US and Canada) |
||
| Testing and certification institution | Underwriter Laboratory (China) Inc performs testing and issue project conclusion letter | MCM performs testing and TUV issues certificate | MCM performs testing and TUV issues certificate |
| Lead time | 5-12W | 2-3W | 2-3W |
| Application cost | Highest in peer | About 50~60% of UL cost | About 60~70% of UL cost |
| Advantage | An American local institution with good recognition in US and Canada | An International institution owns authority and offers reasonable price, also be recognized by North America | An American institution with good recognition in North America |
| Disadvantage |
|
Less brand recognition than that of UL | Less recognition than that of UL in certification of product component |
▍Why MCM?
● Soft Support from qualification and technology: As the witness testing lab of TUVRH and ITS in North American Certification, MCM is able to perform all types of testing and provide better service by exchanging technology face to face.
● Hard support from technology: MCM is equipped with all testing equipment for batteries of big-sized, small-sized and precision projects (i.e. electric mobile car, storage energy, and electronic digital products), able to provide overall battery testing and certification services in North America, covering standards UL2580, UL1973, UL2271, UL1642, UL2054 and so forth.
Test Purpose:The IP dust-proof rating test chamber uses methods such as blowing dust, raising dust, and stopping dust to simulate the natural environment of wind and sand to conduct dust-proof inspection on the product shell to check whether the wind, sand and dust damage the product.
Test Location:MCM Guangzhou labTest Procedure: The battery is tested in accordance with the IEC 60529-2013 standard
1)Put the sample to be tested into the sand and dust test chamber. For samples with test grade IP6X, connect the suction pipe of the vacuum pump to the test sample (add negative pressure to the product cavity), keep the pressure difference between the battery and the chamber within 2KPa, and close the door, test for 8 hours.
2)After the test is completed, turn off the power, use a brush to remove the talcum powder on the surface of the sample and unplug the suction tube.
3)After the test, disassemble the battery to check whether there is talc dust inside.
