Discussion meeting on Certification Technical Rules of Robot Battery
Discussion meeting on Certification Technical Rules of Robot Battery,
Robot Battery,
▍Compulsory Registration Scheme (CRS)
Ministry of Electronics & Information Technology released Electronics & Information Technology Goods-Requirement for Compulsory Registration Order I-Notified on 7th September, 2012, and it came into effect on 3rd October, 2013. Electronics &Information Technology Goods Requirement for Compulsory Registration, what is usually called BIS certification, is actually called CRS registration/certification. All electronic products in the compulsory registration product catalog imported to India or sold in the Indian market must be registered in the Bureau of Indian Standards (BIS). In November 2014, 15 kinds of compulsory registered products were added. New categories include: mobile phones, batteries, power banks, power supplies, LED lights and sales terminals, etc.
▍BIS Battery Test Standard
Nickel system cell/battery: IS 16046 (Part 1): 2018/ IEC62133-1: 2017
Lithium system cell/battery: IS 16046 (Part 2): 2018/ IEC62133-2: 2017
Coin cell/battery is included in CRS.
▍Why MCM?
● We have been focused on Indian certification for more than 5 years and helped client obtain the world’s first battery BIS letter. And we have practical experiences and solid resource accumulation in BIS certification field.
● Former senior officers of Bureau of Indian Standards (BIS) are employed as certification consultant, to ensure case efficiency and remove the risk of registration number cancellation.
● Equipped with strong comprehensive problem solving skills in certification, we integrate indigenous resources in India. MCM keeps good communication with BIS authorities to provide clients with the most cutting-edge, most professional and most authoritative certification information and service.
● We serve leading companies in various industries and earn a good reputation in the field, which make us deeply trusted and supported by clients.
Resolution 3 (DSH 1037A) : Resolution on the selection of serial models. The same series of batteries only differ in capacity, then how to carry out the certification? IEC recommends to start with the maximum capacity and test batteries that are 20% lower than the maximum capacity. If the difference in the total capacity of a series of batteries does not exceed 20%, select the lowest, highest, and middle capacity batteries for the testing.Resolution 2 (DSH 2161) : IEC 62133-2 requires that tests be conducted using samples produced within six months. However, cells in battery samples may not need to meet the 6 months requirement. And it is planned to remove the 6-month sample requirement in the next edition of IEC 62133-2.Resolution 1 (DSH 2182) : There are two methods for IEC 62133-2 , in which method 2 requires charging cutoff current to be 0.05 ItA, even though the manufacturer has defined a different cutoff current. However, you can provide samples for testing with the different cutoff voltage, and the results will be as a reference.Recently, IECEE officially issued and immediately took effect three battery CTL resolutions, mainly related to the CB certification standard IEC 62133 of lithium batteries. These three resolutions have been issued before, and the reason for re-issuing is to increase the standard scope applicable to the resolution. For example, IEC 62619, IEC62660 and other standards are added to DSH10037A. The following are the specific contents of the resolutions:
