20T Electromagnetic Vibration Generator System Come into Use,
20T Electromagnetic Vibration Generator,
No number |
Certification / coverage |
Certification specification |
Suitable for the product |
Note |
1 |
Battery transport | UN38.3. | Battery core, battery module, battery pack, ESS rack | Test the battery module when the battery pack / ESS rack is 6,200 watts |
2 |
CB certification | IEC 62619. | Battery core / battery pack | Safety |
IEC 62620. | Battery core / battery pack | Performance | ||
IEC 63056. | Power storage system | See the IEC 62619 for the battery unit | ||
3 |
China | GB/T 36276. | Battery core, battery pack, battery system | CQC and CGC certification |
YD/T 2344.1. | Battery pack | Communication | ||
4 |
The European Union | EN 62619. | Battery core, battery pack | |
VDE-AR-E 2510-50. | Battery pack, battery system | VDE certification | ||
EN 61000-6 Series specifications | Battery pack, battery system | CE certification | ||
5 |
India | IS 16270. | PV battery | |
IS 16046-2. | ESS Battery (Lithium) | Only when the handling is less than 500 watts | ||
6 |
North America | UL 1973. | Battery core, battery pack, battery system | |
UL 9540. | Battery pack, battery system | |||
UL 9540A. | Battery core, battery pack, battery system | |||
7 |
Japan | JIS C8715-1. | Battery core, battery pack, battery system | |
JIS C8715-2. | Battery core, battery pack, battery system | S-Mark. | ||
8 |
South Korea | KC 62619. | Battery core, battery pack, battery system | KC certification |
9 |
Australia | Power storage equipmentElectrical safety requirements | Battery pack, battery system | CEC certification |
▍Important Certification profile
“CB Certification- -IEC 62619
CB Certification profile
CB Certified IEC(Standards.The goal of CB certification is to “use more” to promote international trade;
The CB system is an international system of the (Electrical Qualification Testing and Certification System) operating on the IECEE, called short for the IEC Electrical Qualification Testing and Certification Organization.
“The IEC 62619 is available for:
1. Lithium batteries for mobile equipment: forklift trucks, golf carts, AGV, railway, ship.
. 2. Lithium battery used for fixed equipment: UPS, ESS equipment and emergency power supply
“Test samples and certification period
No number |
Test terms |
Number of certified tests |
Test time |
|
Battery unit |
Battery pack |
|||
1 |
External short-circuit test | 3 | N/A. | Day 2 |
2 |
Heavy impact | 3 | N/A. | Day 2 |
3 |
Land test | 3 | 1 | Day 1 |
4 |
Heat exposure test | 3 | N/A. | Day 2 |
5 |
Excessive charging | 3 | N/A. | Day 2 |
6 |
Forced discharge test | 3 | N/A. | Day 3 |
7 |
Force the internal paragraph | 5 | N/A. | For 3-5 days |
8 |
Hot burst test | N/A. | 1 | Day 3 |
9 |
Voltage overcharge control | N/A. | 1 | Day 3 |
10 |
Current overcharge control | N/A. | 1 | Day 3 |
11 |
Overheating control | N/A. | 1 | Day 3 |
Total of the total | 21 | 5(2) | 21 days (3 weeks) | |
Note: “7″ and “8″ can be selected in either way, but “7″ is recommended. |
▍North American ESS Certification
▍North American ESS Certified Test Standards
No number |
Standard Number | Standard name | Note |
1 |
UL 9540. | ESS and the facilities | |
2 |
UL 9540A. | ESS evaluation method of hot storm fire | |
3 |
UL 1973. | Batteries for stationary vehicle auxiliary power supplies and light electric rail (LER) purposes | |
4 |
UL 1998. | Software for the programmable components | |
5 |
UL 1741. | Small Converter safety standard | When being applied to the |
“Information required for the project inquiry
Specification for battery cell and battery module (shall include rated voltage capacity, discharge voltage, discharge current, discharge termination voltage, charging current, charging voltage, maximum charging current, maximum discharge current, maximum charging voltage, maximum operating temperature, product size, weight, etc.)
Inverter specification table (shall include rated input voltage current, output voltage current and duty cycle, operating temperature range, product size, weight, etc.)
ESS specification: rated input voltage current, output voltage current and power, operating temperature range, product size, weight, operating environment requirements, etc
Internal product photos or structural design drawings
Circuit diagram or system design diagram
“Samples and certification time
UL 9540 certification is usually 14-17 weeks (safety assessment for BMS features must be included)
Sample requirements (see for the information below. The project will be evaluated based on the application data)
ESS:7 or so (large ESS allows multiple tests for one sample due to sample cost, but requires a minimum of 1 battery system, 3 battery modules, a certain number of Fuse and relays)
Battery core: 6 (UL 1642 certificates) or 26
BMS management system: about 4
Relays: 2-3 (if any)
“Entrusted test terms for the ESS battery
Test terms |
Battery unit |
The module |
Battery pack |
|
Electrical performance |
Room temperature, high temperature, and low temperature capacitance |
√ |
√ |
√ |
Room temperature, high temperature, low temperature cycle |
√ |
√ |
√ |
|
AC, DC internal resistance |
√ |
√ |
√ |
|
Storage at room temperature and high temperature |
√ |
√ |
√ |
|
Safety |
Heat exposure |
√ |
√ |
N/A. |
Overcharge (protection) |
√ |
√ |
√ |
|
Over-discharge (protection) |
√ |
√ |
√ |
|
Short-circuit (protection) |
√ |
√ |
√ |
|
Overtemperature protection |
N/A. |
N/A. |
√ |
|
Overload protection |
N/A. |
N/A. |
√ |
|
Wear the nail |
√ |
√ |
N/A. |
|
Press ressing |
√ |
√ |
√ |
|
Subtest test |
√ |
√ |
√ |
|
Salt ine test |
√ |
√ |
√ |
|
Force the internal paragraph |
√ |
√ |
N/A. |
|
Thermal diffusion |
√ |
√ |
√ |
|
Environment |
Low air pressure |
√ |
√ |
√ |
Temperature impact |
√ |
√ |
√ |
|
Temperature cycle |
√ |
√ |
√ |
|
Salt affairs |
√ |
√ |
√ |
|
Temperature and humidity cycle |
√ |
√ |
√ |
|
Note: The N/A. is not applicable② does not include all evaluation items, if the test is not included in the above scope. |
▍Why is it the MCM?
“Large measuring range, high-precision equipment:
The 1) has battery unit charge and discharge equipment with 0.02% accuracy and maximum current of 1000A, 100V/400A module test equipment, and battery pack equipment of 1500V/600A.
The 2) is equipped with 12m³ constant humidity, 8m³ salt fog and high and low temperature compartments.
3)Equipped with piercing equipment displacement up to 0.01 mm and compaction equipment weighing 200 tons, drop equipment and 12000A short circuit safety test equipment with adjustable resistance.
4)Have the ability to digest a number of certification at the same time, to save customers on samples, certification time, test costs, etc.
5)Work with examination and certification agencies around the world to create multiple solutions for you.
6)We will accept your various certification and reliability test requests.
“Professional and technical team:
We can tailor a comprehensive certification solution for you according to your system and help you get quickly to the target market.
We will help you develop and test your products, and provide accurate data.
Post time:
Jun-28-2021In line with the company’s strategic development direction in the field of power and energy storage testing, MCM’ s 20T double-slide vibration generator system, which had been ordered in December 2021, was officially put into use recently. The device is mainly used for vibration testing of large battery packs. The usage of this vibration generator system will cover the vibration requirements of various power battery packs.The vibration generator system mainly is contained with the host part and the control part, with vibration table, cooling unit, intelligent power amplifier, vertical table, horizontal slide table, waterproof and heat insulation device, vibration controller, acceleration sensor, air compressor, etc. It can realize sinusoidal, random, typical impact, resonance search and resident, sinusoidal plus random, random plus random, data acquisition and spectrum analysis, multi-task analysis, impact response spectrum, transient impact, road spectrum simulation, CAN communication protocol and other functions. Here are the main parameters of test capability:MCM, with the mission of “Making certification & testing simple and happy”, has been steadily moving forward in the battery industry, providing clients with simpler, more efficient and more comprehensive certification & testing services like a “butler”. The introduction of the 20T double-slide vibration generator system, which was a supplement of vibration test, is based on the suggestions and requirements from our clients. MCM will grow together with our clients and continuously improve our capabilities to provide clients with more comprehensive and accurate testing services.